2 cock vs 1

Uploader: Mauricio 22 days ago   Recommend: hottest nylon girls vs 1 lucky guy xxx moms ass 7777 movies video Tag: 2 cock vs 1

The half-cock notch most commonly worked through insertion of a spring -loaded thin metal plate into a slot cut into the tumbler, the tumbler being variously either part of the hammer or mechanically attached to the pivot-point of the hammer, depending on the particular firearm under discussion. The purpose of the half-cock position has variously been used either for loading a firearm, as a safety mechanism, or for both reasons. Half-cock is when the position of the hammer of a firearm is partially—but not completely—cocked. In practice, the half-cock notch was often prone to breakage when used as an early safety mechanism, whereby the tumbler would have part of the metal around the slot shear away, thereby removing the fragile safety mechanism, and permitting the hammer to fall and the firearm to fire. Hidden categories: Articles needing additional references from June All articles needing additional references. Please help improve this article by adding citations to reliable sources. This technique—load one, skip one, load the remaining chambers and come to full cock, then lower the hammer on an empty chamber—will work for any single-action revolver, regardless if it is a five-, six- or eight- or nine-shot cylinder. With the hammer in the half-cock safety position, a hard impact to the hammer, such as from dropping the firearm, can break the safety mechanism and cause a discharge.

Featured Videos

© 2020 flowindsurfing.com - All rights reserved. All Models are over 21 y.o.